Pages

Thursday, August 17, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Water Damage Drying

The Principles of Water Damage Drying


Water Damage Drying Chicago Water Damage Restoration
The IICRC S500 Water Damage Restoration Standard and Reference Guide describes the task of Water Damage Drying through five principles.

1. Provide For Safety
2. Document And Inspect The Project
3. Mitigate Further Damage
4. Clean And Dry Affected Areas
5. Complete The Restoration

1. Provide For The Safety of Workers And Occupants


Water Damage Drying Chicago Water Damage Restoration
The technician's first responsibility when arriving at a water damage site is to identify and eliminate safety hazards. The restoration contractor is responsible to provide for the health and safety of workers and occupants during restoration procedures.

2. Document And Inspect The Project


Water Damage Drying Chicago Water Damage Restoration
The restorer must evaluate the extent of water migration and be able to measure the moisture absorbed by materials in order to properly scope the work to be done. As drying is attempted, the restorer must verify that anticipated progress is actually being achieved.

Due to the number of variables present that affect the drying of materials, progress cannot be assumed. Frequent inspection and monitoring is therefore essential. As you enter rooms, inspect ceilings carefully. Wet plaster and sheet rock are very heavy and can be a hazard.

Be aware of bulging ceilings that may hold trapped water. If rainwater has collected in the ceiling, the rainwater will find it own route into the floors below.

3. Mitigate Further Damage


Water Damage Drying Chicago Water Damage Restoration
Drying decisions are made based upon critical information the restorer obtains during the initial assessment. The inspection not only checks the extent of moisture intrusion, but also considers the potential for additional Water damages.

Remove any water soaked items stored in the attic for treatment. The weight of Water soaked boxes can cause cracking in the plaster ceilings of the floor below. Open windows and vents to allow fresh air to circulate. If your electrical system is safe and you have an attic fan, turn it on.

4. Clean And Dry Affected Areas


Water Damage Drying Chicago Water Damage Restoration
Cleaning procedures are used whenever soils and debris must be removed to expedite the drying process. Contaminated materials that can be ultimately restored require cleaning either before or after the drying process.

Any highly porous item affected, such as valuable contents, require intensive cleaning. Flooding may be quick, but drying out a building is a time consuming effort.

Allowing natural ventilation and evaporation to work is better for the building than the using heated forced-air or air conditioning systems. The rapid drying out of a historic building using hot air power drying systems can cause irreparable harm to significant features of the building.

5. Complete The Restoration


Water Damage Drying Chicago Water Damage Restoration
The Water Damage Restoration technician's job is not done when the materials are dry. As the drying proceeds, restorers have to re-evaluate the condition of structural items or contents and consider whether they will require refinishing or restoration to return them to a pre-loss condition.

Any building materials that were removed or disrupted will need reconstruction. The job is not complete until all affected materials are clean, dry, and equal or better in appearance and function than they were before the loss occurred.

Tuesday, August 15, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Mold Inspections

Important Things You Should Know About Mold Inspections

A mold inspection is when a person looks for mold growth in a building. Here are some important factors to consider for mold inspections.

Water Damage Restoration Chicago Mold Removal
1. Qualified Mold Inspector
Mold inspections need to be performed by a qualified mold inspector who has formal training and experience with mold inspections.

2. Past Or Current Mold Growth
Mold inspections should look for evidence of past or current mold growth. Past mold growth may indicate a water problem which will come back when certain conditions return such as a recurring leak.

3. Mold Within The Building
Mold inspections should look for mold within the building, inside walls, and in other areas where mold growth is undesirable, including areas where mold growth could be causing structural issues such as wood decay in crawlspaces.

4. Normal Mold Growth
Some mold growth in buildings may be perfectly normal. Ceratosystis and Ophiostoma are two molds that grow on lumber and are frequently found growing on two by fours or other structural framing within buildings. These molds grow on the sap of wood and stop growing once the wood has dried. Although they cause black staining on the wood, they do not cause any structural issues.

5. Look For Sources Of Moisture
It is very important that the mold inspector look for sources of moisture. Water is essential for mold growth. Without a source of water, you will not have mold growth.


Source:
http://www.moldreport.com/mold_inspections.html



Mold Removal Chicago | Free Mold Inspections! | http://bellatrestoration.com | (312) 351-5441

Tuesday, August 8, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Shower Mold

How To Prevent Shower Mold

Mold Removal Chicago
1. Shake curtain. This will allow the curtain to completely dry between uses, reducing the amount of mold that builds up.

2. Spray every surface, every day. There are Daily showers sprays available in stores that help prevent mold and mildew.

3. Clean it regularly. You need to clean the bathroom regularly to prevent mold buildup!

4. Run your bathroom fans regularly. Either run your bathroom fan while you shower, or make it a point to run it for at least 15 minutes afterward. Or make sure you keep a bathroom window open.



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Friday, August 4, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Weather Damage

Rain or Shine: 7 Ways That Weather Can Damage Your Home

Here are seven different ways that weather can cause damage to your home.

1. Wind
Extremely powerful winds from tornadoes and hurricanes can scrape the shingles off the tops of roofs and pull gutters away from rooflines.
2. Hail
Millions of dollars in damages are common from just a single hailstorm. If the hailstones are even moderately sized, their weight — coupled with the force at which they fall from the sky — can poke holes in the shingles of a roof. Large hailstones can even dent or bend gutters as well.
3. Rain
Though the rain itself usually doesn’t cause structural damage, any water that leaks into a home through gaps in the roof or walls can lead to messes that can be costly to clean up. This water can also lead to damage to walls, ceilings, and floors; as well as mold and mildew problems throughout a home.
4. Cold
Wintry temperatures (usually below 20 degrees) can affect a home even when there is no precipitation. Frigid conditions can cause pipes to freeze; and if they burst, flooding can occur in basements or rooms.
5. Snow
A little bit of snow usually doesn’t cause any problems. But multiple feet of snow can weigh on a roof or gutters and overwhelm physical support systems; causing buckling or holes in roofs and bending or breaking gutters.
6. Ice
During prolonged periods of precipitation and/or cold temperatures, ice can build up in a gutter to form an ice dam. These dams, which are fed by snowpack on roofs, can not only buckle and dislodge gutters; but the ice can also creep underneath shingles to damage the roof.
7. Sun
During prolonged periods of heat, the sun can damage furniture, rugs, and artwork by fading colors and making fibers brittle.


Source:
http://www.harryhelmet.com/rain-or-shine-7-ways-that-weather-can-damage-your-home/



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Tuesday, August 1, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Flooded Basement

7 Steps to Avoid a Flooded Basement

Gutters & Downspouts
Keep gutters free of debris and position downspouts away from the foundation. The goal is to drain storm water at least three feet away, so if necessary, consider running extensions or troughs.
Foundation Cracks
Inspect the exterior foundation and your basement's walls and floors. Use epoxy to fill any foundation cracks and if warning signs are detected, apply masonry sealer indoors. For more serious problems, call a pro.
Sump Pumps
If you have a below-grade sump pump, check to make sure its well is free of debris. If you have a portable pump, position it in the lowest part of the basement and be sure it's connected to a power source.
Sewers & Septics
If you haven't had your sewer inspected or your septic tank cleaned, spring is a good time to address these concerns. During periods of prolonged, heavy rainfall, clogged sewers and over-taxed septics are disasters waiting to happen.
Window Well Covers
If you have below-grade basement windows, install window well covers that will fasten securely to your home's foundation. Clear acrylic covers allow light to enter, even as they keep out rain, leaves, and pests.
Generators
Remember a sump pump only works if you have power. If you live in an area plagued with frequent storms and power outages, a generator may be a long-term investment worth considering.
Insurance
Review your property insurance policy and consider additional coverage, especially if you have a finished basement. Usually, homeowners' insurance does not cover flooding or sewer backups. Undecided? Check out The Case for Flood Insurance.


Source:
https://www.bobvila.com/slideshow/7-steps-to-avoid-a-flooded-basement-44256/storm-drainage



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Water Damage Chicago Mold Removal | Bella Mold Removal | Basement Flood

7 Steps to Prevent Mold After a Basement Flood

The number one rule in preventing mold is the 48-hour rule– if furnishings or walls get wet from a storm or burst pipe, you need to dry it out within 48 hours to prevent mold from growing.

1. Turn off the electricity
2. Pump the water out of your basement
3. Remove all your wet items
4. Clean the walls and floor
5. Get the air moving and remove excess moisture
6. Look for mold and return your items to the basement
7. Keep a dehumidifier and air cleaner in the basement


Source:
http://www.pumpalarm.com/7-steps-to-prevent-mold-after-a-basement-flood/



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Monday, May 22, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Roof Damage Signs

Common Signs of Roof Damage

roof damage
Holes in the roof
Split seams
Missing shingles
Bruises or dented asphalt shingles
Cracked or broken tile
Slate, or concrete shingles
Granules collecting in gutters or downspouts
Leaks in your roof or ceiling Dents on vents, gutters, or flashing



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Thursday, May 18, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Home Flood Tips

Home Flood Tips

Take Pictures.
Call your Insurance Company.
Find A Home Restoration Company Like Bella Mold Removal.
Wear rubber gloves to remove water-damaged possessions and to avoid contaminants.
Check for any visible structural damage, such as warping, loosened or cracked foundation elements, cracks, and holes before entering the home and contact utility companies if you suspect damage to water, gas, electric, and sewer lines.



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Monday, May 8, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Dry Ice Blasting

Bella Mold Removal Uses The Newest Technology: Dry Ice Blasting

Dry ice blasting has many unique and superior benefits over traditional blasting media.

Non-abrasive, nonflammable and non conductive cleaning method.
Environmentally responsible and contains no secondary contaminants such as solvents or grit media.
Clean and approved for use in the food industry.
Allows most items to be cleaned in place without time-consuming disassembly.
Can be used without damaging active electrical or mechanical parts or creating fire hazards.
Can be used to remove production residue, release agents, contaminants, paints, oils and biofilms.
Can be as gentle as dusting smoke damage from books or as aggressive as removing weld slag from tooling.
Can be used for many general cleaning applications.



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Friday, April 28, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Mold Related Sickness

11 Top Symptoms of Mold Related Sickness

Mold Removal Chicago 1. Fatigue and weakness
2. Headache
3. light sensitivity
4. Poor memory
5. Difficulty finding words
6. Difficulty concentrating
7. Morning stiffness
8. Joint pain
9. Unusual skin sensations
10. Tingling and numbness
11. Shortness of breath

If you experience any combination of these symptoms please seek medical attention immediately.



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Wednesday, April 19, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Home Repair

4 Factors For Budgeting Home Repair



Weather:
Homes in areas affected by freezing temperatures, ice and snow are subject to more strain than homes in areas unaffected by cold weather. Similarly, homes in areas where termites, high winds, heavy rains and other extreme weather conditions or pest infestations will experience more wear-and-tear.

Condition:
Homes located at the bottom of a hill (where water drains and collects), in a flood plain, or in other areas that create environmental stresses will also impact the amount of care and maintenance it needs.

Location:
Homes located at the bottom of a hill (where water drains and collects), in a flood plain, or in other areas that create environmental stresses will also impact the amount of care and maintenance it needs.

Single-Family vs. Attached
A single-family home needs a larger maintenance but since you need to replace your own roof, siding and gutters and maintain a yard. A condo or town home won’t need as hefty of a maintenance budget, since the exterior is cared for by your Home owners Association.

Source:
http://thebalance.com



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Thursday, April 13, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Mold Removal

Mold Growth

Summer is upon us and Mold loves to grow when you're on vacation! Here are 3 tips to prevent mold while on vacation Here are three easy steps to help prevent mold when you go on vacation:

1. If You suspect humidity, set a dehumidifier to keep the moisture level below 60 percent. In your closet, place a hanging moisture absorb-er that will trap excess humidity and eliminate musty odors.

2. Check for water around windows, doors, bathroom leaks, kitchen sinks and washing machines anywhere where water can build up.

3. Clean surfaces of oil, soap, dust and dirt. When these materials are exposed to water they are breeding grounds for mold.



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Sunday, April 9, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Home Improvement

Home Improvement Tips

Spring is a great time for small repairs that can save you thousands of dollars! Here Are 3 Home improvements that will save you money.

1. Get prepared for Bad Weather
Being Proactive will impact on the amount of damage to a home, improving safety and lessening storm repair costs, said Jim Gustin, senior property specialist for Travelers, an insurance firm. Clearing Out Vents Vents can get clogged with dust and other debris, but can be easily cleaned with a small compressed air can, Hunt said. This will ensure proper ventilation, and make heating and cooling more efficient.

2. Get Your Air Conditioner Serviced
Make sure your Air Conditioner is running efficiently when you need to run it in the hotter months. also, make sure your caulking is in good condition around doors and windows.

3. Check out Your Roof
It's a good idea to have your roof checked before spring showers arrive. It’s common to find broken shingles that need to be replaced. It may cost a couple hundred dollars for a check and minor repairs, he said. Just make sure you’re using a reputable company for the inspection.



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441

Friday, January 13, 2017

Water Damage Chicago Mold Removal | Bella Mold Removal | Mold Removal

Mold Removal

Mold Removal Chicago Water Damage Restoration Chicago Mold can grow directly on the surfaces of your home. There must be two important factors involved for mold to be able to grow. These two things are water, and organic materials (which feed the mold).

Keep the trees and shrubbery around your home trimmed away from stucco to keep mold at a minimum Removing Mold from Surfaces: 1 part Bleach to 3 parts water may also be used to clean mildew from surfaces. Make sure to wear gloves and keep a bucket of wash solution nearby to rinse the skin in case of accidental contact. Keep cleaning solutions away from dogs and small children.



Mold Removal Chicago | Free Inspections! | http://bellatrestoration.com | (312) 351-5441